Air Tire Repair Polish Patch Tools, Include 2500rpm Low Speed Air Tire Buffer, Tire Inner Liner Scraper, Patch Roller, Tungsten Steel Buffing Wheel 42mm 55mm

Features:Wide application scenarios: Polishing machines are mainly driven by compressed air and can be used for grinding and polishing curved surfaces of materials such as tires, rubber, hardware crafts, and stone.There is a speed control switch on the back of the product, which can be adjusted with a straight screwdriver. The speed ranges from 0 revolutions per minute to 2500 revolutions per minute.Equipped with American, European, and Japanese standard air intakes.The polishing head is made of tungsten carbide material, which has the characteristics of wear resistance, pressure resistance, non rusting, corrosion resistance.Provide tire rollers and tire liner scraper for easy tire repair. Designed for rolling inner tubes and tire repair patches to remove trapped air, ensuring good adhesion and sealing between the repair patch and the tire.The rear ventilation design avoids direct blowing of air.The product includes: 1 grinder, 1 trachea, 3 intake connector, 2 42mm tungsten steel grinding head, 2 55mm tungsten steel grinding head, 1 clamp, 3 connecting rod, 1 tire roller, 1 tire liner scraper.Usage Steps:Step 1: Polishing areas that require repair.Step 2: Use a scraper to scrape off any dirt that has not fallen off during polishing.Step 3: Stick tire patches in the repair area..Step 4:Use a tire repair roller to perform back and forth rolling to remove all air.Note:Manual measurement may have a deviation of a few millimeters, which is a normal phenomenon.When using the tire repair roller, roll it a few more times.If the tire is damaged on the sidewall, please replace it promptly.Product Weight : 1850 G / 65.26 OuncesProduct Dimensions (L*W*H) : 33.0*14.4*6.5 CM / 12.99*5.67*2.56 InchesPackage Weight : 1850.0 G / 65.26 OuncesPackage Dimensions (L*W*H) : 33.0*14.5*6.5 CM / 12.99*5.71*2.56 InchesPackage Include:1 x Grinder1 x Trachea2 x 42mm Tungsten Steel Grinding Head1 x Clamp1 x Tire Roller1 x Tire Liner Scraper2 x 55mm Tungsten Steel Grinding Head3 x Intake Connector3 x Connecting Rod

• Grinding head is made of tungsten steel, which is wear-resistant and suitable for grinding and polishing the tire surface.
• Equipped with an tire inner liner scrapper, it has excellent performance and durability, which will enhance your tire repair experience.
• Repair roller auxiliary tool, used to exhaust the air inside the tire and repair various types of tires (including cars, trucks, motorcycles)
• There is a speed switch on the back of the air tire repair polish patch tools, which can be adjusted with a flat screwdriver. The speed range is 0 rpm to 2500 rpm.
• Tire repair tools include 1 grinder, 1 air pipe, 3 air inlet joints, 1 42mm tungsten steel grinding head, 2 55mm tungsten steel grinding heads, 1 clamp, 3 connecting rods, 1 tire roller, and 1 tire inner liner scraper.